I'd like to announce that in addition to ABS parts that are made with FDM technology I'm now offering SLS/SLA/EBM parts. THis should help in almost anyone's rapid prototyping needs. I'll be adding more formats soon. Please see my classified add under NE... moreI'd like to announce that in addition to ABS parts that are made with FDM technology I'm now offering SLS/SLA/EBM parts. THis should help in almost anyone's rapid prototyping needs. I'll be adding more formats soon. Please see my classified add under NEW SOUTH 3D PRINTING, LLC.
anthony byrdI'd like to announce that in addition to ABS parts that are made with FDM technology I'm now offering SLS/SLA/EBM parts. THis should help in almost anyone's rapid prototyping needs. I'll be adding more formats soon. Please see my classified add under NE... moreI'd like to announce that in addition to ABS parts that are made with FDM technology I'm now offering SLS/SLA/EBM parts. THis should help in almost anyone's rapid prototyping needs. I'll be adding more formats soon. Please see my classified add under NEW SOUTH 3D PRINTING, LLC.
Offering ABS made with FDM technology.
New customers can get a part @1/2 price ABS & 1 free ABS part with additional parts.
Now offering SLA, SLS, EBM parts.
Special offers for Alibre users.
Quotes are free. 3d.printing@att.net
July 12, 2011
anthony byrdJust got my LLC. I'll restart my classified add soon. Special offers for ALIBRE users only. Look for New South 3D Printing, LLC to find out what they are. 3d.printing@att.net
July 12, 2011
anthony byrdhave a part 25" dia. graphics are awefull. looks like octagon. anybody know how to tweak graphics to make it look like a round part?
anthony byrd
Richard, thanks for info. it's freaking me out as i add features. not sure if i'm overlapping geo. enough.
June 25, 2011
Richard CaldwellZoom into an area on your 25" diameter and you will see the closure you zoom the more it looks polygon. then make a circle and using the circle constrain to constrain the two together. You find when you select the first circle the selection point might no... moreZoom into an area on your 25" diameter and you will see the closure you zoom the more it looks polygon. then make a circle and using the circle constrain to constrain the two together. You find when you select the first circle the selection point might not be on the first circle. Because Alibre knows where the edge is at but cannot display it properly becuase it uses to much over head.
June 25, 2011
Bill HeidtAnthony:
You may also have your Minimal Circular Facets set too low. In the menu select: File\Properties\Display and set Minimal Circular Facets to something between 15 and 30. Then select the Apply Options tab and select Both and select apply. A word ... moreAnthony:
You may also have your Minimal Circular Facets set too low. In the menu select: File\Properties\Display and set Minimal Circular Facets to something between 15 and 30. Then select the Apply Options tab and select Both and select apply. A word of caution, depending on your system hardware a value of 30 may cause your system to bog down. It's a trade off. You can also select The Current Document in Apply Options for that particular file you're trying to make look good and leave it set lower for the system. You should play around with it you can't break it. less
June 25, 2011
Richard Caldwell
When I tried to increase Circular Facets I got what I called the zebra affect. The under lining would show throught casing the curved surface to have strips.
June 25, 2011
Cyle CaplingerTurning the minimal circular facets up will solve this issue. the question is whether or not your machine can handle doing that. In all reality the object you are designing is the same whether that value is 10 or 60. The difference is simply a display val... moreTurning the minimal circular facets up will solve this issue. the question is whether or not your machine can handle doing that. In all reality the object you are designing is the same whether that value is 10 or 60. The difference is simply a display value. Generally the best option is to work with this value turned down like it is by default and then raise it when you are done before you export to Keyshot.
June 27, 2011
anthony byrdjust removed my classified ad, changing it to include LLC when it's all complete. Still quoting, still offering part at half for new customers. 3d.printing@att.net
What Alibre product do you use?
Alibre Design Professional
Tell the world about yourself!
About Me
Owner New South 3D printing, Louisville Ky. Design and rapid protoyping services.
Offering ABS made with FDM technology.
Now selling SLA, SLS, EBM parts for prototyping.
Offering ABS made with FDM technology.
New customers can get a part @1/2 price ABS & 1 free ABS part with additional parts.
Now offering SLA, SLS, EBM parts.
Special offers for Alibre users.
Quotes are free. 3d.printing@att.net
Loading ...
