I have the POTENTIAL to get a rather large design/development project. Please seem my "classifieds" posting. Let me emphasize that this is a "request in expectation" of winning a contract and NOT a "done deal" by any stretc... moreI have the POTENTIAL to get a rather large design/development project. Please seem my "classifieds" posting. Let me emphasize that this is a "request in expectation" of winning a contract and NOT a "done deal" by any stretch of imagination. However, the potential is great -- assuming we (me and the group with whom I am working) get through this "gate."
Lew MerrickI have the POTENTIAL to get a rather large design/development project. Please seem my "classifieds" posting. Let me emphasize that this is a "request in expectation" of winning a contract and NOT a "done deal" by any stretc... moreI have the POTENTIAL to get a rather large design/development project. Please seem my "classifieds" posting. Let me emphasize that this is a "request in expectation" of winning a contract and NOT a "done deal" by any stretch of imagination. However, the potential is great -- assuming we (me and the group with whom I am working) get through this "gate."
Interested parties should E-MAIL a brief bio & CV to tangent@olympus.net (Lew Merrick).
I do NOT have this contract in hand at this point in time. This is a groundwork request.
It will be done virtually with on-line meetings and daily (on-line) data back-up being the norm. People will be hired under W4 or 1099 time-based contracts.
If things go as fast as possible, I would need to start bringing such people onto the team as early as June 2013 -- with delays beyond that being not only possible, but probable. There is a year's worth of work for the team (IF the contract comes throu...
I have just completed a proprosal for a rather large design/development task. IF the group for whom I did this work gets the contract (and please note the IF in this statement), I will need 10-12 experienced Alibre designers to make this happen. This is ...
March 29
Lew MerrickI just uploaded a library of Aluminum Association extruded angle part files over at GrabCAD -- for your design pleasure.
Lew MerrickI have now uploaded "libraries" of AISC S-Flange & W-Flange beams over at http://www.GrabCAD.com for you enjoyment and task simplification...
April 18, 2012
Lew MerrickOK, I have just uploaded libraries of Square Aluminum Tube and Rectangular Aluminum Tube (square corner Aluminum Association sizes) over at GrabCAD.
December 6, 2011
Lew MerrickI have just posted models of inch-sized square & rectangular steel tubing over at GrabCAD for your design ease & pleasure.
Lew MerrickSebastian -- Not unless metric sizes somehow become commonly available here in the U.S. I have no access without paying too much for the privilege to standard and stocked dimensions for metric materials. Also, many of the "standards" in metric (S-flange... moreSebastian -- Not unless metric sizes somehow become commonly available here in the U.S. I have no access without paying too much for the privilege to standard and stocked dimensions for metric materials. Also, many of the "standards" in metric (S-flange & W-flange I-beams notably) are mere "metrification" of the inch-based sizes developed in the U.S.
November 27, 2011
Lew MerrickSebastian -- If you review the part model for my square & rectangular tube geometry, you will see a set of "rules" for their construction. You may have to modify the outside radius generation rule. However, if you do so, all you need to do is (A) conver... moreSebastian -- If you review the part model for my square & rectangular tube geometry, you will see a set of "rules" for their construction. You may have to modify the outside radius generation rule. However, if you do so, all you need to do is (A) convert my base from inches to mm and (B) create a list of length X width X wall-thickness for the sizes you are interested in and then spend a couple of hours stepping through the models, updating the variables, and saving them to individual part files. It took me a total of (about) six yours to create the part geometry lists and generate all the part models for my "libraries." YOU can do the same (and share them with the rest of us), right? less
November 27, 2011
Lew MerrickThere is now a library of inch size (R-type) bearings in open and shielded forms posted over at GrabCAD.
Interested parties should E-MAIL a brief bio & CV to tangent@olympus.net (Lew Merrick).
I do NOT have this contract in hand at this point in time. This is a groundwork request.
It will be done virtually with on-line meetings and daily (on-line) data back-up being the norm. People will be hired under W4 or 1099 time-based contracts.
If things go as fast as possible, I would need to start bringing such people onto the team as early as June 2013 -- with delays beyond that being not only possible, but probable. There is a year's worth of work for the team (IF the contract comes through).
I have just completed a proprosal for a rather large design/development task. IF the group for whom I did this work gets the contract (and please note the IF in this statement), I will need 10-12 experienced Alibre designers to make this happen. This is a request for information.
Loading ...
